新疆11选5

当前位置:新疆11选5>海珀新闻>新闻资讯>聚氨酯保温管在保温管中是什么样的地位?

聚氨酯保温管在保温管中是什么样的地位?

来源:http://www.rrhsf.com 日期:2019-05-29 发布人:admin
保温建材在市面上的种类越来越多,其间聚氨酯资料的保温产品就够消费者看上一段时辰的,普通的消费者在选购时对价钱仍是很关怀的,那么我就先来看看聚氨酯直埋保温管的商场价钱。综合全体商场展开趋向思索,依据预制聚氨酯保温管的展开局势来看,直埋保温管的价钱比拟前段时辰有了很大起伏的降落,关于消费者来说无疑是个好消息。价钱要素必定了,我们就来看看重要的一局部,技艺参数,聚氨酯直埋保温管是如何供热的。
There are more and more kinds of thermal insulation building materials on the market. In the meantime, the thermal insulation products of polyurethane materials are enough for consumers to see for a period of time. Ordinary consumers are still very concerned about the price when choosing and purchasing, so I will first look at the market price of polyurethane direct-buried thermal insulation tubes. According to the development situation of prefabricated polyurethane insulating pipes, the price of directly buried insulating pipes has a great fluctuation compared with the previous period, which is undoubtedly good news for consumers. The price factor is certain. Let's take a look at the most important part, the technical parameters, and how the polyurethane direct-buried insulation pipe is heating.
两种敷设埋设深度思索不同要素。
Consider the different elements of two laying depths.
(1)当必定选用有补偿直埋敷设办法时,埋设深度只思索由于空中荷载的效果不会毁坏管道的安稳便可,从经济、施工便利等方面思索。中选用有补偿直埋敷设办法时,尽量浅埋,普通覆土厚度大于0.6米即可,且与管径巨细无关。
(1) When the direct burial method with compensation must be selected, the burial depth only considers that the effect of air load will not destroy the stability of the pipeline, and considers from the aspects of economy and construction convenience. In the case of direct burial with compensation, shallow burial should be used as far as possible. The thickness of common overlying soil is more than 0.6 meters, and it has nothing to do with the diameter.
(2)中选用无补偿直埋敷设办法时,埋设深度要思索管道的安稳央求,安稳性主要与覆土厚度有关,普通比有补偿埋得深,中选用不预热的无补偿直埋敷设管道时,小覆土深度应按《城市热网规划规范》(CJJ34—90)第7.2.15条实行,覆土厚度应与管径巨细成正比。
济南保温管
(2) When choosing the non-compensated direct burial method, the burial depth should consider the stability requirement of the pipeline. The stability is mainly related to the thickness of the overlying soil, which is generally deeper than that with compensation. When choosing the non-preheated direct buried pipeline without compensation, the minimum depth of the overlying soil should be implemented in accordance with Article 7.2.15 of the Code for Urban Heat Network Planning (CJJ34-90), and the thickness of the overlying soil should be proportional to the diameter of the pipeline.
规划中究竟选用无补偿敷设仍是有补偿敷设办法,绳尺是直管道较长,中心分支较少,供热介质不逾越100℃时,我国供热信息网了解到应优先选用无补偿敷设办法,不然,应思索有补偿敷设办法。细致的热网主干线应选用无补偿敷设办法,而分支院子管网则应选用有补偿敷设办法,但如今有的规划者偏心有补偿敷设,应建议优化规划。热熔联接
In the planning, there are still compensatory laying methods. The length of the straight pipe is longer, the central branch is less, and the heating medium does not exceed 100 C. The heating information network of our country knows that the non-compensatory laying method should be preferred. Otherwise, the compensation laying method should be considered. Detailed heat network trunk line should be laid without compensation, while branch yard pipeline network should be laid with compensation, but now some planners have eccentricity and compensation, should recommend optimal planning. Hot melt connection
热熔联接在聚乙烯管道联接中是一种长见的联接办法,也是为经济可靠的一种办法。热熔联接普通有以下几种,热熔对接、热熔鞍形对接、热熔承插联接。
Hot melt bonding is a long-standing method in polyethylene pipeline connection, and it is also the most economical and reliable method. Hot-melt joints generally have the following kinds: hot-melt butt, hot-melt saddle butt and hot-melt socket joint.
大口径黑夹克
Large caliber black jacket
1、热熔对接
1. Hot-melt docking
热熔对接是在必定的压力、时辰和温度条件下,焊接端面被加热到焊接温度,然后彼此联接的办法。但是在聚乙烯管热熔对接进程中,易受环境及人为要素的影响。
Hot-melt butting is a method in which the welding ends are heated to the welding temperature under certain pressure, time and temperature, and then joined to each other. However, in the process of polyethylene pipe hot melt docking, it is vulnerable to environmental and human factors.
2、热熔鞍形对接
2. Hot-melt saddle docking
热熔鞍形对接联接进程比较艰难普通都在工厂预制。
Hot-melt saddle butt connection process is more difficult, usually prefabricated in the factory.
3、热熔承插联接
3. Hot-melt socket connection
热熔承插联接在《燃气用埋地聚乙烯管件》规范中已不选用,在给水管道中运用口径都很小,大口径热熔承插联接施工中,因管子重、对口与刺进深度艰难,无法确保联接质量。
Hot-melt socket connection has not been selected in the code of Buried Polyethylene Pipe Fittings for Gas Use. In the construction of large-caliber hot-melt socket connection, the quality of connection can not be guaranteed because of the heavy pipe, the difficulty of counterpart and penetration depth.

热销产品:   聚氨酯保温钢管厂家 济南保温管 黑夹克直埋式直缝钢管

版权所有:山东海珀管业科技发展有限公司   网站备案编号:鲁ICP备18049456号-1   技术支持:
电话:13953119851 座机:0531—67819251 地址:山东省济南市长清区济南经济开发区南园金轮路9017号 

网址:http://www.rrhsf.com 流量统计:  

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

 

贵州11选5 广西快乐十分 博九福彩网 陕西快乐十分 陕西11选5 9号福彩网 9号福彩网app 甘肃快3 青海快3 新疆11选5