当前位置:新疆11选5>海珀新闻>新闻资讯>聚氨酯保温钢管的构造

聚氨酯保温钢管的构造

来源:http://www.rrhsf.com 日期:2019-01-10 发布人:admin
聚氨酯保温钢管的构造
Construction of Polyurethane Thermal Insulation Pipe
聚氨酯直埋保温管道保温从里到外分三层构造管道保温第一层:任务钢管层依据设计和客户的要求普通选用无缝管(GB8163-87)螺旋焊管(GB9711-88;SY/T5038-92)和直缝焊管(GB3092-93)。钢管外表经过先进的抛丸除锈工艺处置后,钢管除锈等级可达GB8923-1988规范中的Sa2级,外表粗糙度可达GB6060.5-88规范中R=12.5微米。
Thermal insulation of polyurethane direct buried thermal insulation pipeline is divided into three layers from inside to outside. The first layer is composed of seamless pipe (GB8163-87), spiral welded pipe (GB9711-88; SY/T5038-92) and straight welded pipe (GB3092-93) according to design and customer requirements. After treatment by advanced shot peening rust removal process, the steel tube rust removal grade can reach Sa2 level in GB8923-1988 specification, and the surface roughness can reach R=12.5 micron in GB6060.5-88 specification.
管道保温第二层:聚氨酯保温层用高压发泡机在钢管于外护层之间构成的空腔中注入硬质聚氨酯泡沫塑料原液而成。即俗称的“管中管发泡工艺”。其作用一是防水,二是保温,三是支撑热网自重。当保送介质温度爲:-50℃—120℃时,选用硬质聚氨基脲酸酯泡沫塑料做保温层。
The second layer of pipeline thermal insulation: polyurethane thermal insulation layer is made by injecting rigid polyurethane foam plastics into the cavity formed by the high-pressure foaming machine between the outer protective layer of the pipeline. That is commonly known as "tube-in-tube foaming process". Its function is waterproof, heat preservation and self-weight support of heat network. The rigid polyurethane foam is chosen as insulation layer when the temperature of delivery medium is -50 ~120 ~C.
管道保温第三层:高密度聚乙烯维护层预制成一定壁厚的黑色(黄色)塑料管材,其作用一是维护聚氨酯保温层免遭机械硬物毁坏,二是防腐防水。聚氨酯直埋保温管道保温使用:合适保送在-50℃—150℃范围内的各种介质的保温保冷工程。它普遍使用于城市集中供热、暖室、冷库、煤矿、石油港口、化工等行业的保温保冷工程。管道保温劣势特点1降低工程造价。据有关部门测算,控制供热管道,普通状况下可以降低工程造价的25%(采用玻璃钢做维护层)和10%(采用高密度聚乙烯做维护层)左右。2热损耗低,浪费动力。其导热系数爲:λ=0.013—0.03kcal/m·h·oC,比其他过来常用的管道保温资料低得多,保温效果进步4~9倍。再有其吸水率很低。
The third layer of pipeline insulation: high density polyethylene (HDPE) maintenance layer is prefabricated into black (yellow) plastic pipes with a certain wall thickness. Its function is to protect polyurethane insulation layer from damage by mechanical hard objects, and the second is anti-corrosion and waterproof. Thermal insulation of polyurethane direct buried thermal insulation pipeline: It is suitable for thermal insulation and cooling engineering of various mediums in the range of - 50 ~150 C. It is widely used in urban central heating, heating room, cold storage, coal mine, petroleum port, chemical industry and other industries of thermal insulation and cooling engineering. Pipeline insulation disadvantage characteristic 1 reduces project cost. According to the calculation of relevant departments, the cost of heating pipeline can be reduced by 25% (using FRP as maintenance layer) and 10% (using high density polyethylene as maintenance layer) under normal conditions. 2. Low heat loss and waste of power. Its thermal conductivity is: lambda=0.013-0.03kcal/m.h.oC, which is much lower than other commonly used pipeline heat preservation data, and the heat preservation effect is improved by 4-9 times. Moreover, its water absorption rate is very low.
聚氨酯保温钢管厂家
约爲0.2kg/m2。吸水率低的缘由是由于聚氨酯泡沫的闭孔率高达92%左右。低导热系数和低吸水率,加上保温层和里面防水功能好的高密度聚乙烯或玻璃钢维护壳,改动了传统地沟敷设供热管道“穿湿棉袄”的情况,大大增加了供热管道的全体热损耗,热网热损失爲2%,小于国际10%的规范要求。3防腐,绝缘功能好,运用寿命长。由于聚氨酯硬质泡沫保温层严密地粘结在钢管外皮,隔绝了空气和水的渗入,能起到良好的防腐作用。同时它的发泡孔都是闭合的,吸水性很小。高密度聚乙烯外壳、玻璃钢外壳均具有良好的防腐、绝缘和机械功能。因而,任务钢管外皮很舒服到外界空气和水的腐蚀。只需管道外部水质处置好,运用寿命可达50年以上,比传统的地沟敷设、架空敷设运用寿命高3~4倍。
About 0.2 kg/m2. The reason for low water absorption is that the polyurethane foam has a closed porosity of about 92%. Low thermal conductivity and low water absorption, together with insulation layer and waterproof high density polyethylene or fiberglass reinforced plastic maintenance shell, have changed the traditional trench laying of heating pipeline "wearing wet cotton jacket", greatly increased the overall heat loss of heating pipeline, heat loss of heating network is 2%, less than the international norms of 10%. 3. Anti-corrosion, good insulation function and long service life. Because the polyurethane rigid foam insulation layer is tightly bonded to the outer skin of the steel pipe, the infiltration of air and water can be isolated, and good anticorrosion effect can be achieved. At the same time, its foaming holes are closed and its water absorption is very small. High density polyethylene shell and FRP shell have good anti-corrosion, insulation and mechanical functions. Therefore, the outer skin of the task steel pipe is very comfortable to the corrosion of the outside air and water. As long as the external water quality of the pipeline is disposed well, the service life can reach more than 50 years, which is 3-4 times longer than that of traditional trench laying and overhead laying.
本文由山东海珀管业科技发展新疆11选5http://www.rrhsf.com提供整理,想了解更多聚氨酯保温钢管厂家知识,欢迎关注我们,谢谢!!
This article is provided by Shandong Hipper Pipe Technology Development Co., Ltd. http://www.rrhsf.com. We would like to know more about polyurethane insulation pipe manufacturers. Welcome to pay attention to us. Thank you!

热销产品:   聚氨酯保温钢管厂家 黑夹克直埋式直缝钢管 黑夹克直埋无缝钢管

版权所有:山东海珀管业科技发展新疆11选5   网站备案编号:鲁ICP备18049456号-1   技术支持:
电话:13953119851 座机:0531—67819251 地址:山东省济南市长清区济南经济开发区南园金轮路9017号 

网址:http://www.rrhsf.com 流量统计:  

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

 

新疆喜乐彩 青海快3 贵州11选5 9号彩票 云鼎彩票 幸运飞艇官网 幸运飞艇官网 新疆喜乐彩 陕西11选5 陕西快乐十分