来源:http://www.rrhsf.com 日期:2018-12-04 发布人:admin
Anti-corrosion Measures for Straight Seam Steel Pipeline
Anti-corrosive coatings on the outer wall of pipelines: materials and operating conditions of coatings on the outer wall of pipelines.
内壁防腐涂层:爲了避免管内腐蚀、降低摩擦阻力、进步输量而涂于管子内壁的薄膜。常用的涂料有胺固化环氧树脂和聚酰胺环氧树脂,涂层厚度爲 0.038~0.2毫米。爲保证涂层与管壁粘结结实,必需对管内壁停止外表处置。70年代以来趋向于管内、外壁涂层选用相反的资料,以便管内、外壁的涂敷同时停止。
Inner wall anticorrosive coating: To avoid corrosion in the pipe, reduce friction resistance, improve the flow rate and coat the film on the inner wall of the pipe. The common coatings are amine cured epoxy resin and polyamide epoxy resin. The thickness of coatings is 0.038-0.2mm. In order to ensure the bonding between the coating and the pipe wall, it is necessary to stop the external disposal of the pipe wall. Since the 1970s, it has tended to choose the opposite material for inner and outer wall coatings, so that both inner and outer wall coatings can be stopped at the same time.
Anti-corrosion and thermal insulation coating: In order to increase the heat dissipation of pipeline to soil, a compound layer of flatness and anti-corrosion is added to the pipeline on medium and small diameter pipelines for heat transportation of crude oil or fuel oil. The commonly used heat preservation material is rigid polyurethane foam, and the applicable temperature is - 185 - 95 C. In order to improve its strength, a layer of high density polyethylene (HDPE) is added to the thermal insulation layer to form a composite data structure to avoid groundwater infiltrating into the thermal insulation layer.
Electrical maintenance
Change the electrode potential of the metal absolutely in the surrounding medium, so that the metal is not corroded. Electrical maintenance of long distance pipeline only refers to cathode maintenance and corrosion avoidance.
阴极维护:将被维护金属极化成阴极来避免金属腐蚀的办法。这种办法用于船舶防腐已有 150多年的历史;1928年一次用于管道,是将金属腐蚀电池中阴极不受腐蚀而阳极受腐蚀的原理使用于金属防腐技术上。应用外施电流迫使电解液中被维护金属外表全部阴极极化,则腐蚀就不会发作。判别管道能否到达阴极维护的目标有两项。一是小维护电位,它是金属在电解液中阴极极化到腐蚀进程中止时的电位;其值与环境等要素有关,常用的数值爲- 850毫伏(绝对于铜-硫酸铜参比电极测定,下同)。二是大维护电位,即被维护金属外表允许到达的高电位值。当阴极极化过强,管道外表与涂层间会析出氢气,而使涂层发生阴极剥离,所以必需控制汇流点电位在允许范围内,以使涂层免遭毁坏。此值与涂层性质有关,普通取-1.20至-2.0伏间。完成地下管道阴极维护有外加电流法和牺牲阳极法两种。
Cathodic Maintenance: Polarization of the maintained metal into a cathode to avoid metal corrosion. This method has been used for anti-corrosion of ships for more than 150 years. It was first used in pipelines in 1928. The principle that the cathode of metal corroded batteries is not corroded while the anode is corroded was applied to metal anti-corrosion technology. If the applied current is applied to force the cathodic polarization of the surface of the maintained metal in the electrolyte, the corrosion will not occur. There are two criteria to determine whether the pipeline can reach the goal of cathode maintenance. The first is the minimum maintenance potential, which is the potential of metal from cathodic polarization in electrolyte to the end of corrosion process. Its value is related to environment and other factors. The commonly used value is - 850 mV (absolutely determined by copper-copper sulfate reference electrode, the same below). The second is the maximum maintenance potential, which is the maximum potential allowed to be reached by the surface of the maintained metal. When the cathodic polarization is too strong, hydrogen will precipitate between the surface of the pipeline and the coating, which will lead to the cathodic stripping of the coating. Therefore, it is necessary to control the potential of the confluence point within the allowable range in order to prevent the coating from being destroyed. This value is related to the properties of the coating. It is usually taken between -1.20 and -2.0 volts. There are two methods for cathode maintenance of underground pipelines, i. e. external current method and sacrificial anode method.
牺牲阳极法是采用比被维护金属电极电位更负的金属与被维护金属衔接,两者在电解液中构成原电池。电位较负的金属(如镁、锌、铝及其合金)成爲阳极,在输入电流的进程中逐步损耗掉,被维护的管道金属成爲阴极而免遭腐蚀,所以称电位较负的金属爲牺牲阳极。其接线如图4。 地下管道采用牺牲阳极维护,其决议要素是阳极发作电流、阳极数量和维护长度等。当阳极品种确定后,影响上述参数的是阳极接地电阻和与该阳极维护管段区间的漏泄电阻。前者取决于土壤电阻率,后者取决于管道涂层电阻和涂层的施工质量。牺牲阳极运用寿命与分量有关,视需求可用几年至几十年。牺牲阳极具有投资省、管理简便、不需求外电源、避免搅扰腐蚀效果好等优点,所以在地下金属管道防腐中失掉普遍使用。
The sacrificial anode method is to connect the metal with the maintained metal, which is more negative than the potential of the maintained metal electrode. Both of them constitute the primary battery in the electrolyte. Metals with negative potential (such as magnesium, zinc, aluminium and their alloys) become anodes, which are gradually depleted in the process of input current, and the maintained pipeline metals become cathodes to avoid corrosion, so the metal with negative potential is called sacrificial anode. Its wiring is shown in Figure 4. Underground pipelines are maintained with sacrificial anodes, whose key factors are the current of anode onset, the number of anodes and the length of maintenance. When the type of anode is determined, the above parameters are affected by the grounding resistance of the anode and the leakage resistance of the maintenance section of the anode. The former depends on the soil resistivity, and the latter depends on the resistance of pipeline coating and the construction quality of coating. The service life of sacrificial anode is related to its component, and it can be used for years to decades depending on the demand. Sacrifice anode has the advantages of low investment, simple management, no need for external power supply, good effect of avoiding disturbance and corrosion, so it is widely used in underground metal pipeline corrosion protection.
Corrosion avoidance method: first, take measures to reduce leakage current to the minimum limit on stray current source related equipment; second, avoid stray current area as far as possible when laying pipelines, or improve the quality of insulating anticorrosive layer of disturbed pipeline section, adopt shielding, installing insulating flange and other measures; third, make drainage maintenance for disturbed pipelines. The stray current will be discharged from the disturbed pipeline back to the leakage current grid to eliminate the corrosion of the stray current to the pipeline. According to the scope of use and the non-uniform performance of drainage equipment, there are three types: indirect drainage, polar drainage and forced drainage. For the protection of AC disturbance voltage, many countries have formulated technical rules. Secondly, safe interval and pipeline discharge are used to protect pipelines from damage.
In summary, all the above-mentioned Shandong Hipper Pipe Technology Development Co., Ltd. provides, want to know more about the black jacket straight-seam steel pipe, welcome to pay attention to our website: http://www.rrhsf.com Thank you for your support!

热销产品:   聚氨酯保温钢管厂家 济南保温管 黑夹克直埋式直缝钢管

版权所有:山东海珀管业科技发展有限公司   网站备案编号:鲁ICP备18049456号-1   技术支持:
电话:13953119851 座机:0531—67819251 地址:山东省济南市长清区济南经济开发区南园金轮路9017号 

网址:http://www.rrhsf.com 流量统计:  



青海快3 甘肃快3 新疆喜乐彩 青海快3 9号福彩网 博九福彩网注册 青海快3 陕西快乐十分 9号福彩网 陕西快乐十分